Telsto Cold Shrink Tubes for telecommunication
Telsto EPDM Cold Shrink Tubes are a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this per-stretched
condition. The core is removed after the tube has been positioned for installation over an in-line connection, terminal
lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphur.
Features
1. Simple installation, requires only workman's hands.
2. No tool or heat required.
3. Seals tight, retains its resiliency and pressure even after years of aging and exposure.
4. Resists moisture.
5. Wide range, size accommodation.
6. Resists acids and alkalies.
7. Resists ozone and ultraviolet light.
8. Resists fluid splashes.
9. Resists fire - will not support flame.
|
Product |
Tube Inner Diameter (mm) |
Cable range(mm) |
|
Silicone Cold Shrink Tube |
φ15 |
φ4-11 |
|
φ20 |
φ5-16 |
|
|
φ25 |
φ6-21 |
|
|
φ28 |
φ6-24 |
|
|
φ30 |
φ7-26 |
|
|
φ32 |
φ8-28 |
|
|
φ35 |
φ8-31 |
|
|
φ40 |
φ10-36 |
|
|
φ45 |
φ11-41 |
|
|
φ52 |
φ11.5-46 |
|
|
φ56 |
φ12.5-50 |
|
| Remarks: |
|
|
| Tube diameter and tube length can be customized according to customer's requirements. | ||
Application
● It is widely used for waterproof seal in coaxial cables on telecommunication base stations, N-type connector, 1/2 jumper, Din 7/16’’ head and 1/2 jumper connector.
●It can be used as a waterproof seal for cable television connector
● It can be used as a waterproof seal for connecting wires and cables
●Insulation seal for other types of connection.
