Aluminum Entry Panels with 4” Ports


  • Place of Origin: Shanghai, China (Mainland)
  • Brand Name: Telsto
  • Model: TEL-EPK4-78x3
  • color: black
  • material: aluminum
  • Product Type: Wall/Roof Feed- Through System
  • plate size: 4''
  • Description

     Telsto Entry Panels kits run feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application.

    Application

    Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, microwave station etc. kinds of engine room.

    General Characteristics  
    Product Name Aluminum Entry Panel
    Port size 4''
    Port of Panel 4
    Port of Lay Out 2X2
    Material Aluminum
    Panel Size 400X400 mm
    Coating Powder coated
    Includes Boot  l  Cushion  l  Two Clamps
    Boot cushion Rubber
    Color Black
    Boot Size 3 holes for 7/8’’ cable
    Band Clamp Type 3-4 in
    Band Clamp 304 stainless steel 

     

     Material:

    1, metal parts: high quality aluminum alloy plate or stainless steel

    2, sealing element: top-quality rubber that high and low temperature resistant non-deformed and anti-aging capability

    Feature:

    1, adopt -55°C~+60°C temperature changing.

    2, resistant to corrosion of corrosive gas, air, acid rain.

    3, prevent the rain and outside moisture into the engine room through the gap between cable and sealing element or the gap between HLKC and wall. The grade of seal performance can reach IP65.

    4, shield electromagnetism disturbing

    5, provide all sorts of different types sealing element form a whole sealing part, meet different OD cable through a HLKC into the room

    Installation instructions:

    a. reserved a suitable hole, the detailed dimension refer to the product specification.

    b. fix the seal plate into the reserved hole by anchoring.

    c. put waterproof silica gel around the seal plate, the sealing effect will be better.

    Telsto entry boots (3)

    PACKING REFERENCE:

    Telsto Aluminum Feed-thru Entry Panels (3)

  • Previous:
  • Next:

  • Write your message here and send it to us