Passive DAS

Browse by: All
  • DIN Male Type load 50W

    DIN Male Type load 50W

    Application Mobile Communication Network Optimization and Indoor distribution system. Cluster Communication, Satellite Communication, Shortwave Communication and Hopping Radio. Radar, Electronic Navigation and Electronic Confrontation. Aerospace Equipment systems. Material and Plating Center contact Brass / Silver Plating Insulator PTFE Body & Outer Conductor Brass / alloy plated with tri-alloy Gasket Silicon Rubber Electrical Characteristics Characteristics Impedance 50 Oh...
  • Indoor Directional Antenna

    Indoor Directional Antenna

    Feature: Exquisite appearance Good impact resistance, waterproof and anti corrosion ability Standard installing mount kits packages for holding pole Optimized dimension Designed with wide band technology, medium gain, low standing wave ratio Application: GSM/ CDMA/ DCS/ PCS/ 3G/ 4G/ LTE/ WLAN/ Wi-Fi system Follow these procedures to install antenna with holding pole, adjust tilt angle of antenna, tighten bolts, screws and nuts. (1) L shape mounting kits should be aligned antenna bolt, put on ...
  • RF 2 way 800-2700MHz Power Splitter/Divider N-Female 300W

    RF 2 way 800-2700MHz Power Splitter/Divider N-Female 300W

    Our Services 1. Reply your enquiry within 24 hours. 2. Payment model: T/T, L/C, Paypal and Western Union. 3. Many Shipping models: By Air, By Sea, Express(DHL, Fedex, TNT UPS…) 4. Lead(Delivery) time: Normally 14 days after getting order. 5. Port of loading: Shanghai. 6. Guarantee Period : Within 12 months after shipment. 7. Operating guide(Instruction)upon request. 8. Customized drawing ,sample and package can be done. Interface According to IEC 60169-16 Electrical Char...
  • Coupler 6dB

    Coupler 6dB

    Telsto Wide band Directional couplers provide flat coupling of one signal path to another in one direction only (known as directive). They commonly consist of an auxiliary line coupling electrically to a main line. One end of the auxiliary line is permanently fitted with a matched termination. Directive (the difference between coupling in one direction compared to the other) is approximately 20 dB for couplers, Directional couplers are used whenever part of a signal needs to be separated off ...
  • High quality DC-3.0GHz DIN type 100W RF Dummy Load / Termination Load  

    High quality DC-3.0GHz DIN type 100W RF Dummy Load / Termination Load  

    Application Mobile Communication Network Optimization and Indoor distribution system. Cluster Communication, Satellite Communication, Shortwave Communication and Hopping Radio. Radar, Electronic Navigation and Electronic Confrontation. Aerospace Equipment systems. Product  Description Part No. Termination Load N Male / N Female, 2W TEL-TL-NM/F2W N Male / N Female, 5W TEL-TL-NM/F5W N Male / N Female, 10W TEL-TL-NM/F10W N Male / N Female, 25W TEL-TL-NM/F25W N Male / N Female, 50W T...
  • Indoor Omni- directional Ceiling Antenna

    Indoor Omni- directional Ceiling Antenna

    Feature: Exquisite appearance Suitable for ordinary ceiling mounting Wide frequency band, low standing wave, strong anti-interference ability Application: Indoor omni- directional coverage GSM/ CDMA/ PCS/ 3G/ 4G/ LTE/ WLAN system Mechanical Specifications Dimensions 204X115mm Weight 0.5Kg Radiator Material Silver-plated Brass Radome Material ABS Radome Color Ivory-white Operational Humidity < 95% Operating temperature -40~55 ℃ Electrical Specifications Frequency Rang...
  • RF 698-2700MHz N Female connector 4 way Power Splitter

    RF 698-2700MHz N Female connector 4 way Power Splitter

    Multiple-Band Frequency Ranges 300 Watt Power Rating High Reliability Low Cost Design for ease of mounting N-Female Connector
  • Coupler 10dB

    Coupler 10dB

    Telsto Wide band Directional couplers provide flat coupling of one signal path to another in one direction only (known as directive). They commonly consist of an auxiliary line coupling electrically to a main line. One end of the auxiliary line is permanently fitted with a matched termination. Directive (the difference between coupling in one direction compared to the other) is approximately 20 dB for couplers, Directional couplers are used whenever part of a signal needs to be separated off ...
  • High quality DC-3.0GHz N type 100W RF Dummy Load / Termination Load  

    High quality DC-3.0GHz N type 100W RF Dummy Load / Termination Load  

    Termination loads absorb RF & microwave energy and are commonly used as dummy loads of antenna and transmitter. They are also used as match ports in many multi port microwave device such as circulation and directional couple to make these ports which are not involved in the measurement be terminated in their characteristic impedance in order to ensure an accurate measurement. Termination loads, also call dummy loads, are the passive 1-port interconnect devices, which provide a resistive p...
  • Indoor Smoke Antenna 698-2700MHz

    Indoor Smoke Antenna 698-2700MHz

    Feature: Exquisite appearance Suitable for ordinary ceiling mounting Wide frequency band, low standing wave, strong anti-interference ability. Item Specifications Frequency Range 698~960MHz/1710~2700MHz Gain 3±1dBi/4±1dBi VSWR ≤2.0/ ≤1.5   Input Impedance 50Ω Polarization Vertical Horizontal beam width 360° Vertical beam width 85±15°/55±15° Max Power 50W Connector type N-Female             Diameter Ø164x94mm Color White Temperature Operation:-40℃~+60℃ Relative Hum...
  • Telsto Power splitters

    Telsto Power splitters

    Power splitters are passive devices for cellular band in Intelligent Building System (IBS), which are required to split/divide the input signal into multiple signals equally at separate output ports to enable balancing-out the power budget of the network. Telsto Power splitters are in 2, 3 and 4 ways, use strip line and cavity craftwork with silver plated, metal conductors in aluminum housings, with excellent input VSWR, high power ratings, low PIM and very low losses. Excellent design techni...
  • Coupler 15dB

    Coupler 15dB

    Telsto Wide band Directional couplers provide flat coupling of one signal path to another in one direction only (known as directive). They commonly consist of an auxiliary line coupling electrically to a main line. One end of the auxiliary line is permanently fitted with a matched termination. Directive (the difference between coupling in one direction compared to the other) is approximately 20 dB for couplers, Directional couplers are used whenever part of a signal needs to be separated off ...
1234 Next > >> Page 1 / 4