Indoor Smoke Antenna 698-2700MHz
Feature: Exquisite appearance Suitable for ordinary ceiling mounting Wide frequency band, low standing wave, strong anti-interference ability.
| Item | Specifications |
| Frequency Range | 698~960MHz/1710~2700MHz |
| Gain | 3±1dBi/4±1dBi |
| VSWR | ≤2.0/ ≤1.5 |
| Input Impedance | 50Ω |
| Polarization | Vertical |
| Horizontal beam width | 360° |
| Vertical beam width | 85±15°/55±15° |
| Max Power | 50W |
| Connector type | N-Female |
| Diameter | Ø164x94mm |
| Color | White |
| Temperature | Operation:-40℃~+60℃ |
| Relative Humidity Range | 5%~95% |
| Mounting Method | Fixed with screws |
Installation Instructions of N or 7 / 16 or 4310 1 / 2″ super flexible cable
Structure of connector: ( Fig1 )
A. front nut
B. back nut
C. gasket
Stripping dimensions is as shown by diagram ( Fig2 ), attention should be paid while stripping:
1. The end surface of inner conductor should be chamfered.
2. Remove impurities such as copper scale and burr on the end surface of the cable.
Assembling the sealing part: Screw the sealing part in along the outer conductor of the cable as shown by the diagram ( Fig3).
Assembling the back nut (Fig3).
Combine the front and back nut by screwing as shown by diagram ( Figs( 5)
1. Before screwing, smear a layer of lubricating grease on the o-ring.
2. Keep the back nut and the cable motionless, Screw on main shell body on back shell body. Screw down main shell body of back shell body using monkey wrench. Assembling is finished.
