Aluminum Entry Panels with 4” Ports
Telsto Entry Panels runs feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application.
Application
Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, microwave station etc. kinds of engine room.
| General Characteristics | |
| Product Name | Aluminum Entry Panel |
| Port size | 4'' |
| Port of Panel | 4 |
| Port of Lay Out | 2X3 |
| Material | Aluminum |
| Panel Size | 400X500 mm |
| Coating | Powder coated |
| Includes | Boot l Cushion l Two Clamps |
| Boot cushion | Natural Rubber |
| Color | Black |
| Boot Size | 3 holes for 7/8’’ cable |
| Band Clamp Type | 3-4 in |
| Band Clamp | 304 stainless steel |
Feature:
1, adopt -55°C~+60°C temperature changing.
2, resistant to corrosion of corrosive gas, air, acid rain.
3, prevent the rain and outside moisture into the engine room through the gap between cable and sealing element or the gap between HLKC and wall. The grade of seal performance can reach IP65.
4, shield electromagnetism disturbing
5, provide all sorts of different types sealing element form a whole sealing part, meet different OD cable through a HLKC into the room
Installation instructions:
a. reserved a suitable hole, the detailed dimension refer to the product specification.
b. fix the seal plate into the reserved hole by anchoring.
c. put waterproof silica gel around the seal plate, the sealing effect will be better.
PACKING REFERENCE:
