Barrel Cushions & Cable Entry
Products
-
Grommet with 23.6 mm hole for 1 1/4 in standard or click-on hangers
Telsto Barrel Cushion provides versatility in any application, allowing a single cushion to mount a wide range of cable sizes, reducing material and installation costs. These cushions are constructed of UV-resistant EPDM rubber, allowing for proper functionality in extreme temperature and harsh environmental conditions. Barrel cushions are available in multiple sizes to accommodate industry demands for fiber, power, elliptical and coaxial cable requirements. The unique design allows the cushi... -
Rubber Grommet Hanger Insert with (2) 20mm Holes and (1) 10mm Hole
Used with 1-5/8″ snap-in hangers or 1-5/8″ coax blocks to provide support for LMR-400, 3/8” Flex, RG11U, 20mm. Grommet with 1 x 10 mm hole and 2 X 20 mm hole for 1 5/8 in Snap Stack or click-on hanger Product Features: » Made from UV resistant EPDM rubber » Heavy duty construction » Durable in extreme conditions » (2) 20mm & (1) 10mm » Inserts fit in Snap-In Hangers, Coax Blocks, or Snap Blocks » Pack of 10 Product Description Part No. Barrel Cushions ... -
Grommet with 1 x 9 mm hole and 1 X 24 mm hole for 1-5/8 in Snap Stak or Click-on Hanger
Telsto Barrel Cushion provides versatility in any application, allowing a single cushion to mount a wide range of cable sizes, reducing material and installation costs. These cushions are constructed of UV-resistant EPDM rubber, allowing for proper functionality in extreme temperature and harsh environmental conditions. Barrel cushions are available in multiple sizes to accommodate industry demands for fiber, power, elliptical and coaxial cable requirements. The unique design allows the cushi... -
Cable Grommet with Single 5mm hole for 1/2 ” Click-on Hanger
Telsto Barrel Cushion provides versatility in any application, allowing a single cushion to mount a wide range of cable sizes, reducing material and installation costs. These cushions are constructed of UV-resistant EPDM rubber, allowing for proper functionality in extreme temperature and harsh environmental conditions. Barrel cushions are available in multiple sizes to accommodate industry demands for fiber, power, elliptical and coaxial cable requirements. The unique design allows the cushi... -
Barrel Cushion fits 1/2″ to 2-1/4″ snap-in hanger or coax block
Universal barrel cushion, also known as universal rubber grommet, it provides a wide range of cable sizes in a single cushion. It’s made from UV resistant EPDM rubber and can be used to mount fiber optic, power, elliptical waveguide and coax. It accepts both snap-in hangers and coax blocks. Product Features: » Manufactured from EPDM » Heavy duty construction » UV resistant » Wide range of cable sizes » Fits 1/2″ to 2-1/4″ snap-in hanger or coax block » Sold as a kit of 10 *A... -
Hot selling communication auxiliary material Cable Entry plate / Feeder Cable Entry plate
Application Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, microwave station etc. kinds of engine room. Material: 1, metal parts: high quality aluminum alloy plate or stainless steel 2, sealing element: top-quality rubber that high and low temperature resistant non-deformed and anti-aging capability Feature: 1, adopt -55°C~+60°C temperature changing. 2, resistant to corrosion of corrosive gas, air, acid rain. 3,... -
4” Entry Boots Assembly with 7/8’’ 1 hole
Boot Assembly kit cable entry boot include : 1. A outer boot. (EPDM Rubber or natural rubber) 2. A select able inner cushion insert. (EPDM Rubber or natural rubber) 3. Two hose clamp. (Stainless steel 304) Introduction: Each Assembly cable entry boot include : 1. A outer boot. (EPDM Rubber) 2. A select able inner cushion insert. (EPDM Rubber) 3. Two hose clamp. (Stainless steel) The 4″ cable entry boot, is made of EPDM rubber. The material is unaffected by ozone, sunlight, aging, or tem... -
Cable Grommet with Single 7 mm hole for 1/2 ” Click-on Hanger
Telsto Barrel Cushion provides versatility in any application, allowing a single cushion to mount a wide range of cable sizes, reducing material and installation costs. These cushions are constructed of UV-resistant EPDM rubber, allowing for proper functionality in extreme temperature and harsh environmental conditions. Barrel cushions are available in multiple sizes to accommodate industry demands for fiber, power, elliptical and coaxial cable requirements. The unique design allows the cushi... -
Cable Entry port panel plate 4 inch
Application Apply to all sorts of cable into the engine room, thus play a role in sealing, apply to mobile base station, exchange, microwave station etc. kinds of engine room. Material: 1, metal parts: high quality aluminum alloy plate or stainless steel 2, sealing element: top-quality rubber that high and low temperature resistant non-deformed and anti-aging capability Feature: 1, adopt -55°C~+60°C temperature changing. 2, resistant to corrosion of corrosive gas, air, acid rain. 3, prevent t... -
Cable entry panel with 4″ ports. Manufactured from heavy gauge T6 Aluminum
Tough baked-on powder coat finish. The cable entry panel is used for cellular network, to help the feeder cable get into the BTS shelter. The cable Entry, which is used for the waterproof when feeder enters the machine room, is composed of entrance wall / roof feed through plate and cable entry boot. It has good air proof and easy installation features. We have Aluminium Alloy Wall / Roof Feed Thru Plate, Stainless Steel Wall / Roof Feed Thru Plate, Circular Orifice type Cable Entry. ... -
Boot assembly kit
Boot Assembly kit cable entry boot include : 1. A outer boot. (EPDM Rubber or natural rubber) 2. A select able inner cushion insert. (EPDM Rubber or natural rubber) 3. Two hose clamp. (Stainless steel 304) The 4″ cable entry boot assembly kit, is made of EPDM rubber or natural rubber. The material is unaffected by ozone, sunlight, aging, or temperature extremes. It is to be installed to the 4″ port on entry panel, and allow the various coaxial cable go into the BTS shelter through... -
Boot Assembly Cushion for 1/2‘’ feeder cable
Boot Assembly Cushion provides versatility in any application, allowing a single cushion to mount a wide range of cable sizes, reducing material and installation costs. These cushions are constructed of UV-resistant EPDM rubber, allowing for proper functionality in extreme temperature and harsh environmental conditions. Barrel cushions are available in multiple sizes to accommodate industry demands for fiber, power, elliptical and coaxial cable requirements. The unique design allows the ...
